Myynti

myynti@motionlok.fi

010 320 2830

Tekninen tuki

tekninen@motionlok.fi

 

Tuotekategoriat

Klima-Flex Saranat

Klima-Flex Saranat

Tuotekoodi
Tuotenimi
Tuotemerkki
Tuotteen lisätiedot
321150
klimaflex Sääd.Sarana
Industrilås
321151
klimaflex Sääd.Sarana
Industrilås
321152
klimaflex Sääd.Sarana
Industrilås
321650
klimaflex Sääd.Sarana
Industrilås
321651
klimaflex Sääd.Sarana
Industrilås
321652
klimaflex Sääd.Sarana
Industrilås
325070
Klimaflex Muovi Sarana
Industrilås
2651-400000
Compression Latching Hinge with Safety Catch Non-locking
Industrilås

180º Hinge-Latch, or latching hinge that may be used as hinge or latch according to need. Allows you to open door as left- or right hinged door, or to remove door completely. Universal left- and right assembly. Provides 6 mm compression and has a built-in safety catch for safe opening of pressurized doors. Patented with registered design.

Clicks into distinct open and closed position for tactile feedback.

Vertical adjustability together with guidance between door and frame parts, makes it easier than ever to get the perfect sealed door. Available in non-locking, push-button, keyed and tool operated version. Also customizable with your logotype.

Note that a normal panel will need four units in order to operate as either left-open, right open, or completely removable. Mount the door part with blind rivets (pop-rivets). The frame part may be mounted with screws or blind rivets.

No problems with thermal break as units are surface-mounted on to door and frame parts, resulting in no parts intruding through the double skinned doors.

2651-400080
Compression Latching Hinge with Safety Catch Keyed IL101
Industrilås

Offset 10mm

180º Hinge-Latch, or latching hinge that may be used as hinge or latch according to need. Allows you to open door as left- or right hinged door, or to remove door completely. Universal left- and right assembly. Provides 6 mm compression and has a built-in safety catch for safe opening of pressurized doors. Patented with registered design.

Clicks into distinct open and closed position for tactile feedback.

Vertical adjustability together with guidance between door and frame parts, makes it easier than ever to get the perfect sealed door. Available in non-locking, push-button, keyed and tool operated version. Also customizable with your logotype.

Note that a normal panel will need four units in order to operate as either left-open, right open, or completely removable. Mount the door part with blind rivets (pop-rivets). The frame part may be mounted with screws or blind rivets.

No problems with thermal break as units are surface-mounted on to door and frame parts, resulting in no parts intruding through the double skinned doors.

 

2651-400035
Compression Latching Hinge with Safety Catch Recessed Hexagon 10
Industrilås

180º Hinge-Latch, or latching hinge that may be used as hinge or latch according to need. Allows you to open door as left- or right hinged door, or to remove door completely. Universal left- and right assembly. Provides 6 mm compression and has a built-in safety catch for safe opening of pressurized doors. Patented with registered design.

Clicks into distinct open and closed position for tactile feedback.

Vertical adjustability together with guidance between door and frame parts, makes it easier than ever to get the perfect sealed door. Available in non-locking, push-button, keyed and tool operated version. Also customizable with your logotype.

Note that a normal panel will need four units in order to operate as either left-open, right open, or completely removable. Mount the door part with blind rivets (pop-rivets). The frame part may be mounted with screws or blind rivets.

No problems with thermal break as units are surface-mounted on to door and frame parts, resulting in no parts intruding through the double skinned doors.

2651-400070
Compression Latching Hinge with Safety Catch Push-button
Industrilås

Offset 10mm

180º Hinge-Latch, or latching hinge that may be used as hinge or latch according to need. Allows you to open door as left- or right hinged door, or to remove door completely. Universal left- and right assembly. Provides 6 mm compression and has a built-in safety catch for safe opening of pressurized doors. Patented with registered design.

Clicks into distinct open and closed position for tactile feedback.

Vertical adjustability together with guidance between door and frame parts, makes it easier than ever to get the perfect sealed door. Available in non-locking, push-button, keyed and tool operated version. Also customizable with your logotype.

Note that a normal panel will need four units in order to operate as either left-open, right open, or completely removable. Mount the door part with blind rivets (pop-rivets). The frame part may be mounted with screws or blind rivets.

No problems with thermal break as units are surface-mounted on to door and frame parts, resulting in no parts intruding through the double skinned doors.

 

2651-401000
Compression Latching Hinge with Safety Catch Non-locking
Industrilås

Offset 10mm

180º Hinge-Latch, or latching hinge that may be used as hinge or latch according to need. Allows you to open door as left- or right hinged door, or to remove door completely. Universal left- and right assembly. Provides 6 mm compression and has a built-in safety catch for safe opening of pressurized doors. Patented with registered design.

Clicks into distinct open and closed position for tactile feedback.

Vertical adjustability together with guidance between door and frame parts, makes it easier than ever to get the perfect sealed door. Available in non-locking, push-button, keyed and tool operated version. Also customizable with your logotype.

Note that a normal panel will need four units in order to operate as either left-open, right open, or completely removable. Mount the door part with blind rivets (pop-rivets). The frame part may be mounted with screws or blind rivets.

No problems with thermal break as units are surface-mounted on to door and frame parts, resulting in no parts intruding through the double skinned doors.

 

2651-401035
Compression Latching Hinge with Safety Catch Recessed Hexagon 10
Industrilås

Offset 10mm

180º Hinge-Latch, or latching hinge that may be used as hinge or latch according to need. Allows you to open door as left- or right hinged door, or to remove door completely. Universal left- and right assembly. Provides 6 mm compression and has a built-in safety catch for safe opening of pressurized doors. Patented with registered design.

Clicks into distinct open and closed position for tactile feedback.

Vertical adjustability together with guidance between door and frame parts, makes it easier than ever to get the perfect sealed door. Available in non-locking, push-button, keyed and tool operated version. Also customizable with your logotype.

Note that a normal panel will need four units in order to operate as either left-open, right open, or completely removable. Mount the door part with blind rivets (pop-rivets). The frame part may be mounted with screws or blind rivets.

No problems with thermal break as units are surface-mounted on to door and frame parts, resulting in no parts intruding through the double skinned doors.

 

2651-401080
Compression Latching Hinge with Safety Catch Keyed IL101
Industrilås

Offset 10mm

180º Hinge-Latch, or latching hinge that may be used as hinge or latch according to need. Allows you to open door as left- or right hinged door, or to remove door completely. Universal left- and right assembly. Provides 6 mm compression and has a built-in safety catch for safe opening of pressurized doors. Patented with registered design.

Clicks into distinct open and closed position for tactile feedback.

Vertical adjustability together with guidance between door and frame parts, makes it easier than ever to get the perfect sealed door. Available in non-locking, push-button, keyed and tool operated version. Also customizable with your logotype.

Note that a normal panel will need four units in order to operate as either left-open, right open, or completely removable. Mount the door part with blind rivets (pop-rivets). The frame part may be mounted with screws or blind rivets.

No problems with thermal break as units are surface-mounted on to door and frame parts, resulting in no parts intruding through the double skinned doors.

Offset 10mm

 

2651-401070
Compression Latching Hinge with Safety Catch Push-button
Industrilås

Offset 10mm

180º Hinge-Latch, or latching hinge that may be used as hinge or latch according to need. Allows you to open door as left- or right hinged door, or to remove door completely. Universal left- and right assembly. Provides 6 mm compression and has a built-in safety catch for safe opening of pressurized doors. Patented with registered design.

Clicks into distinct open and closed position for tactile feedback.

Vertical adjustability together with guidance between door and frame parts, makes it easier than ever to get the perfect sealed door. Available in non-locking, push-button, keyed and tool operated version. Also customizable with your logotype.

Note that a normal panel will need four units in order to operate as either left-open, right open, or completely removable. Mount the door part with blind rivets (pop-rivets). The frame part may be mounted with screws or blind rivets.

No problems with thermal break as units are surface-mounted on to door and frame parts, resulting in no parts intruding through the double skinned doors.

 

2651-420034
Compression Hinge-Latch with Safety Catch - 3D Adjustable
Industrilås

Latching Hinge that may be used as hinge or latch according to need. Allows you to open door as left- or right hinged door, or to remove door completely. Universal left- and right assembly. Available with a built-in safety catch for safe opening of pressurized doors. In addition to the 3 mm compression that always applies, the Hinge Latch can easily be adjusted between offset 0 mm, 1,5 mm or 3,0 mm to put more pressure on the gasket and ensure a tight and sealed door. This adjusting is done by lifting the cover and turning the adjustment screw using a "Torx 20"-bit. Door part mounts on a mounting bracket (included) which stabilize the door in the Latching Hinge area and provide further adjustability. The Latching Hinge can be adjusted 3 mm in all three directions. Clicks into distinct open and closed position for tactile feedback and equipped with insert "Recessed hexagon 8 mm". Supplied with open and close indication for insert position.

Also customizable with your logotype (logotype area prepared). Frame part mounts with screws or blind rivets. Mounting bracket for the door mounts with Ø 4 mm blind rivets (pop-rivets). Mounting hardware not included.

Note that a normal panel will need four units in order to operate as either left-open, right open, or completely removable.

When mounted in a properly rated, suitable enclosure this handle meets the requirements for sealing level L1 regarding positive or negative air pressure according to DIN EN 1886.

No problems with thermal break as units are surface-mounted on to door and frame parts, resulting in no parts intruding through the double skinned doors.

2651-430034
Compression Hinge-Latch without Safety Catch - 3D Adjustable
Industrilås

Compression Hinge-Latch without Safety Catch - 3D Adjustable

Latching Hinge that may be used as hinge or latch according to need. Allows you to open door as left- or right hinged door, or to remove door completely. Universal left- and right assembly. Available with a built-in safety catch for safe opening of pressurized doors. In addition to the 3 mm compression that always applies, the Hinge Latch can easily be adjusted between offset 0 mm, 1,5 mm or 3,0 mm to put more pressure on the gasket and ensure a tight and sealed door. This adjusting is done by lifting the cover and turning the adjustment screw using a "Torx 20"-bit. Door part mounts on a mounting bracket (included) which stabilize the door in the Latching Hinge area and provide further adjustability. The Latching Hinge can be adjusted 3 mm in all three directions. Clicks into distinct open and closed position for tactile feedback and equipped with insert "Recessed hexagon 8 mm". Supplied with open and close indication for insert position.

Also customizable with your logotype (logotype area prepared). Frame part mounts with screws or blind rivets. Mounting bracket for the door mounts with Ø 4 mm blind rivets (pop-rivets). Mounting hardware not included.

Note that a normal panel will need four units in order to operate as either left-open, right open, or completely removable.

When mounted in a properly rated, suitable enclosure this handle meets the requirements for sealing level L1 regarding positive or negative air pressure according to DIN EN 1886.

No problems with thermal break as units are surface-mounted on to door and frame parts, resulting in no parts intruding through the double skinned doors.

2651-510050
180° Hinge for Insulated Door
Industrilås

Hinge designed for use on insulated doors in HVAC units. With door in open position, the smart quick-release function allows for complete door removal and door attachment, without the need for any tool.

Universal right and left mounting with 180º opening angle. Surface mounted on frame and door with rivets or screws.

Upon request, we can quote you a tool change so that the frame part can be supplied with other widths and offsets between 0-25 mm. The door part is prepared to display your logotype with a simple change in the moulding tool.

Note that the quick door-removal function only is possible when the door is in the "open" position.

2651-511050
180° Hinge for Insulated Door
Industrilås

Offset 10mm

Hinge designed for use on insulated doors in HVAC units. With door in open position, the smart quick-release function allows for complete door removal and door attachment, without the need for any tool.

Universal right and left mounting with 180º opening angle. Surface mounted on frame and door with rivets or screws.

Upon request, we can quote you a tool change so that the frame part can be supplied with other widths and offsets between 0-25 mm. The door part is prepared to display your logotype with a simple change in the moulding tool.

Note that the quick door-removal function only is possible when the door is in the "open" position.